# install problem

**URL:** <https://forum.xojo.com/t/install-problem/19169>\
**Category:** Linux\
**Created:** [September 9, 2014, 2:02pm UTC](https://forum.xojo.com/t/install-problem/19169 "2014-09-09T14:02:06Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gary\_Vassalotti](https://forum.xojo.com/user_avatar/forum.xojo.com/gary_vassalotti/32/444_2.png) [@Gary\_Vassalotti](https://forum.xojo.com/u/Gary_Vassalotti)\
**Post date:** [September 9, 2014, 2:02pm UTC](https://forum.xojo.com/t/install-problem/19169/1 "2014-09-09T14:02:06Z")

</div>

I have Xojo installed on my laptop (64 bit Mageia 3), runs fine. I have been trying to get it installed again on my desktop but keep getting an error when loading.

I get a segementation fault. I have done a strace, and have the results, but the file is HUGE, so, I am copying the last few lines only… any ideas on how to get this to run again?

Thanks.

------ begin copy below -------------

stat64("/usr/share/mime/mime.cache", {st\_mode=S\_IFREG|0644, st\_size=132484, …}) = 0  
open("/usr/share/mime/mime.cache", O\_RDONLY|O\_LARGEFILE) = 21  
fstat64(21, {st\_mode=S\_IFREG|0644, st\_size=132484, …}) = 0  
mmap2(NULL, 132484, PROT\_READ, MAP\_SHARED, 21, 0) = 0xa8519000  
close(21) = 0  
stat64("/usr/share/mime/mime.cache", {st\_mode=S\_IFREG|0644, st\_size=132484, …}) = 0  
open("/usr/share/mime/mime.cache", O\_RDONLY|O\_LARGEFILE) = 21  
fstat64(21, {st\_mode=S\_IFREG|0644, st\_size=132484, …}) = 0  
mmap2(NULL, 132484, PROT\_READ, MAP\_SHARED, 21, 0) = 0xa83df000  
close(21) = 0  
stat64("/usr/local/share/mime/mime.cache", 0xbff7ee20) = -1 ENOENT (No such file or directory)  
stat64("/usr/local/share/mime/globs2", 0xbff7ee20) = -1 ENOENT (No such file or directory)  
stat64("/usr/local/share/mime/globs", 0xbff7ee20) = -1 ENOENT (No such file or directory)  
stat64("/usr/local/share/mime/magic", 0xbff7ee20) = -1 ENOENT (No such file or directory)  
open("/usr/local/share/mime/aliases", O\_RDONLY|O\_LARGEFILE) = -1 ENOENT (No such file or directory)  
open("/usr/local/share/mime/subclasses", O\_RDONLY|O\_LARGEFILE) = -1 ENOENT (No such file or directory)  
open("/usr/local/share/mime/icons", O\_RDONLY|O\_LARGEFILE) = -1 ENOENT (No such file or directory)  
open("/usr/local/share/mime/generic-icons", O\_RDONLY|O\_LARGEFILE) = -1 ENOENT (No such file or directory)  
open("/home/gary/.local/share/mime/video/x-msvideo.xml", O\_RDONLY|O\_LARGEFILE) = -1 ENOENT (No such file or directory)  
open("/usr/share/mime/video/x-msvideo.xml", O\_RDONLY|O\_LARGEFILE) = 21  
fstat64(21, {st\_mode=S\_IFREG|0644, st\_size=2867, …}) = 0  
read(21, “\<?xml version=“1.0” encoding=“ut”…, 2867) = 2867  
close(21) = 0  
stat64(”/home/gary/.mozilla/plugins/npatgpc.so", {st\_mode=S\_IFREG|0777, st\_size=98320, …}) = 0  
lstat64("/home/gary/.mozilla/plugins/npatgpc.so", {st\_mode=S\_IFREG|0777, st\_size=98320, …}) = 0  
stat64("/home/gary/.mozilla/plugins/npatgpc.so", {st\_mode=S\_IFREG|0777, st\_size=98320, …}) = 0  
open("/home/gary/.mozilla/plugins/npatgpc.so", O\_RDONLY|O\_CLOEXEC) = 21  
read(21, “\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@s\0\0004\0\0\0”…, 512) = 512  
fstat64(21, {st\_mode=S\_IFREG|0777, st\_size=98320, …}) = 0  
mmap2(NULL, 97720, PROT\_READ|PROT\_EXEC, MAP\_PRIVATE|MAP\_DENYWRITE, 21, 0) = 0xa8501000  
mmap2(0xa8518000, 4096, PROT\_READ|PROT\_WRITE, MAP\_PRIVATE|MAP\_FIXED|MAP\_DENYWRITE, 21, 0x17000) = 0xa8518000  
close(21) = 0  
open("/etc/ld.so.cache", O\_RDONLY|O\_CLOEXEC) = 21  
fstat64(21, {st\_mode=S\_IFREG|0644, st\_size=92553, …}) = 0  
mmap2(NULL, 92553, PROT\_READ, MAP\_PRIVATE, 21, 0) = 0xa83c8000  
close(21) = 0  
open("/lib/libXmu.so.6", O\_RDONLY|O\_CLOEXEC) = 21  
read(21, “\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0PI\0\0004\0\0\0”…, 512) = 512  
fstat64(21, {st\_mode=S\_IFREG|0755, st\_size=102696, …}) = 0  
mmap2(NULL, 100688, PROT\_READ|PROT\_EXEC, MAP\_PRIVATE|MAP\_DENYWRITE, 21, 0) = 0xa83af000  
mmap2(0xa83c6000, 8192, PROT\_READ|PROT\_WRITE, MAP\_PRIVATE|MAP\_FIXED|MAP\_DENYWRITE, 21, 0x17000) = 0xa83c6000  
close(21) = 0  
mprotect(0xa83c6000, 4096, PROT\_READ) = 0  
munmap(0xa83c8000, 92553) = 0  
open("/tmp/atgpc.log", O\_RDWR|O\_CREAT|O\_APPEND, 0666) = 21  
fstat64(21, {st\_mode=S\_IFREG|0666, st\_size=1020, …}) = 0  
mmap2(NULL, 4096, PROT\_READ|PROT\_WRITE, MAP\_PRIVATE|MAP\_ANONYMOUS, -1, 0) = 0xae574000  
write(21, “NPATGPC : NPP\_Initialize  
“, 25) = 25  
close(21) = 0  
munmap(0xae574000, 4096) = 0  
open(”/tmp/atgpc.log”, O\_RDWR|O\_CREAT|O\_APPEND, 0666) = 21  
fstat64(21, {st\_mode=S\_IFREG|0666, st\_size=1045, …}) = 0  
mmap2(NULL, 4096, PROT\_READ|PROT\_WRITE, MAP\_PRIVATE|MAP\_ANONYMOUS, -1, 0) = 0xae574000  
write(21, “CGpcModule started  
“, 19) = 19  
close(21) = 0  
munmap(0xae574000, 4096) = 0  
stat64(”/tmp/atgpc.log”, {st\_mode=S\_IFREG|0666, st\_size=1064, …}) = 0  
open("/tmp/atgpc.log", O\_RDWR|O\_CREAT|O\_APPEND, 0666) = 21  
fstat64(21, {st\_mode=S\_IFREG|0666, st\_size=1064, …}) = 0  
mmap2(NULL, 4096, PROT\_READ|PROT\_WRITE, MAP\_PRIVATE|MAP\_ANONYMOUS, -1, 0) = 0xae574000  
write(21, “Netscape plugin trace [WebEx Plu”…, 51) = 51  
close(21) = 0  
munmap(0xae574000, 4096) = 0  
chmod("/tmp/atgpc.log", 0666) = 0  
open("/tmp/atgpc.log", O\_RDWR|O\_CREAT|O\_APPEND, 0666) = 21  
fstat64(21, {st\_mode=S\_IFREG|0666, st\_size=1115, …}) = 0  
mmap2(NULL, 4096, PROT\_READ|PROT\_WRITE, MAP\_PRIVATE|MAP\_ANONYMOUS, -1, 0) = 0xae574000  
write(21, “NPATGPC : NPP\_Shutdown  
“, 23) = 23  
close(21) = 0  
munmap(0xae574000, 4096) = 0  
open(”/tmp/atgpc.log”, O\_RDWR|O\_CREAT|O\_APPEND, 0666) = 21  
fstat64(21, {st\_mode=S\_IFREG|0666, st\_size=1138, …}) = 0  
mmap2(NULL, 4096, PROT\_READ|PROT\_WRITE, MAP\_PRIVATE|MAP\_ANONYMOUS, -1, 0) = 0xae574000  
write(21, “CGpcModule Begin ClearAllInstanc”…, 35) = 35  
close(21) = 0  
munmap(0xae574000, 4096) = 0  
open("/tmp/atgpc.log", O\_RDWR|O\_CREAT|O\_APPEND, 0666) = 21  
fstat64(21, {st\_mode=S\_IFREG|0666, st\_size=1173, …}) = 0  
mmap2(NULL, 4096, PROT\_READ|PROT\_WRITE, MAP\_PRIVATE|MAP\_ANONYMOUS, -1, 0) = 0xae574000  
write(21, “CGpcModule End ClearAllInstances”…, 33) = 33  
close(21) = 0  
munmap(0xae574000, 4096) = 0  
open("/tmp/atgpc.log", O\_RDWR|O\_CREAT|O\_APPEND, 0666) = 21  
fstat64(21, {st\_mode=S\_IFREG|0666, st\_size=1206, …}) = 0  
mmap2(NULL, 4096, PROT\_READ|PROT\_WRITE, MAP\_PRIVATE|MAP\_ANONYMOUS, -1, 0) = 0xae574000  
write(21, “CGpcModule stoped  
“, 18) = 18  
close(21) = 0  
munmap(0xae574000, 4096) = 0  
clock\_gettime(CLOCK\_MONOTONIC, {37310, 10594087}) = 0  
stat64(”/home/gary/.mozilla/plugins/nppdf.so”, {st\_mode=S\_IFREG|0755, st\_size=127260, …}) = 0  
lstat64("/home/gary/.mozilla/plugins/nppdf.so", {st\_mode=S\_IFREG|0755, st\_size=127260, …}) = 0  
stat64("/home/gary/.mozilla/plugins/nppdf.so", {st\_mode=S\_IFREG|0755, st\_size=127260, …}) = 0  
open("/home/gary/.mozilla/plugins/nppdf.so", O\_RDONLY|O\_CLOEXEC) = 21  
read(21, “\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\3000\0\0004\0\0\0”…, 512) = 512  
fstat64(21, {st\_mode=S\_IFREG|0755, st\_size=127260, …}) = 0  
mmap2(NULL, 125768, PROT\_READ|PROT\_EXEC, MAP\_PRIVATE|MAP\_DENYWRITE, 21, 0) = 0xa8390000  
mmap2(0xa83ae000, 4096, PROT\_READ|PROT\_WRITE, MAP\_PRIVATE|MAP\_FIXED|MAP\_DENYWRITE, 21, 0x1e000) = 0xa83ae000  
close(21) = 0  
clock\_gettime(CLOCK\_MONOTONIC, {37310, 11683947}) = 0  
stat64("/home/gary/.mozilla/plugins/nprhapengine.so", {st\_mode=S\_IFREG|0666, st\_size=2788848, …}) = 0  
lstat64("/home/gary/.mozilla/plugins/nprhapengine.so", {st\_mode=S\_IFREG|0666, st\_size=2788848, …}) = 0  
stat64("/home/gary/.mozilla/plugins/nprhapengine.so", {st\_mode=S\_IFREG|0666, st\_size=2788848, …}) = 0  
open("/home/gary/.mozilla/plugins/nprhapengine.so", O\_RDONLY|O\_CLOEXEC) = 21  
read(21, “\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0p\300\4\0004\0\0\0”…, 512) = 512  
fstat64(21, {st\_mode=S\_IFREG|0666, st\_size=2788848, …}) = 0  
mmap2(NULL, 2815712, PROT\_READ|PROT\_EXEC, MAP\_PRIVATE|MAP\_DENYWRITE, 21, 0) = 0xa80e0000  
mmap2(0xa834f000, 204800, PROT\_READ|PROT\_WRITE, MAP\_PRIVATE|MAP\_FIXED|MAP\_DENYWRITE, 21, 0x26f000) = 0xa834f000  
mmap2(0xa8381000, 59104, PROT\_READ|PROT\_WRITE, MAP\_PRIVATE|MAP\_FIXED|MAP\_ANONYMOUS, -1, 0) = 0xa8381000  
close(21) = 0  
mprotect(0xa80e0000, 2551808, PROT\_READ|PROT\_WRITE) = 0  
mprotect(0xa80e0000, 2551808, PROT\_READ|PROT\_EXEC) = 0  
futex(0xa83712a8, FUTEX\_WAKE\_PRIVATE, 2147483647) = 0  
— SIGSEGV {si\_signo=SIGSEGV, si\_code=SEGV\_MAPERR, si\_addr=0} —  
+++ killed by SIGSEGV +++

---

<div class="post-metadata">

**Author:** ![Bob\_Coleman](https://forum.xojo.com/letter_avatar_proxy/v4/letter/b/a88e57/32.png) [@Bob\_Coleman](https://forum.xojo.com/u/Bob_Coleman)\
**Post date:** [September 9, 2014, 2:32pm UTC](https://forum.xojo.com/t/install-problem/19169/2 "2014-09-09T14:32:52Z")

</div>

Did you install the necessary 32bit libs?

[http://documentation.xojo.com/index.php/System\_requirements](http://documentation.xojo.com/index.php/System_requirements)

---

<div class="post-metadata">

**Author:** ![Gary\_Vassalotti](https://forum.xojo.com/user_avatar/forum.xojo.com/gary_vassalotti/32/444_2.png) [@Gary\_Vassalotti](https://forum.xojo.com/u/Gary_Vassalotti)\
**Post date:** [September 9, 2014, 2:44pm UTC](https://forum.xojo.com/t/install-problem/19169/3 "2014-09-09T14:44:56Z")

</div>

Sorry, should have been more clear… I am trying to get it to run on the 32bit version of Mageia 4 on the desktop PC…

---

<div class="post-metadata">

**Author:** ![Bob\_Coleman](https://forum.xojo.com/letter_avatar_proxy/v4/letter/b/a88e57/32.png) [@Bob\_Coleman](https://forum.xojo.com/u/Bob_Coleman)\
**Post date:** [September 9, 2014, 2:50pm UTC](https://forum.xojo.com/t/install-problem/19169/4 "2014-09-09T14:50:03Z")

</div>

Have you tried opening a terminal and running it from the command line? That can sometimes give you more direct clues than a stack trace.

---

<div class="post-metadata">

**Author:** ![Gary\_Vassalotti](https://forum.xojo.com/user_avatar/forum.xojo.com/gary_vassalotti/32/444_2.png) [@Gary\_Vassalotti](https://forum.xojo.com/u/Gary_Vassalotti)\
**Post date:** [September 9, 2014, 7:31pm UTC](https://forum.xojo.com/t/install-problem/19169/5 "2014-09-09T19:31:04Z")

</div>

Yes, running from the terminal results with the program ending with a segmentation fault, usually after the startup screen flashes with prior projects listed.

---

<div class="post-metadata">

**Author:** ![brian\_franco](https://forum.xojo.com/user_avatar/forum.xojo.com/brian_franco/32/156_2.png) [@brian\_franco](https://forum.xojo.com/u/brian_franco)\
**Post date:** [September 9, 2014, 7:42pm UTC](https://forum.xojo.com/t/install-problem/19169/6 "2014-09-09T19:42:32Z")

</div>

try using the ldd command to display what shared libraries might be missing

---

<div class="post-metadata">

**Author:** ![Norman\_P](https://forum.xojo.com/letter_avatar_proxy/v4/letter/n/858c86/32.png) [@Norman\_P](https://forum.xojo.com/u/Norman_P)\
**Post date:** [September 9, 2014, 7:44pm UTC](https://forum.xojo.com/t/install-problem/19169/7 "2014-09-09T19:44:11Z")

</div>

> [@128154:@brian franco](#):
>
> try using the ldd command to display what shared libraries might be missing

Or a distro that’s officially supported

---

<div class="post-metadata">

**Author:** ![Gary\_Vassalotti](https://forum.xojo.com/user_avatar/forum.xojo.com/gary_vassalotti/32/444_2.png) [@Gary\_Vassalotti](https://forum.xojo.com/u/Gary_Vassalotti)\
**Post date:** [September 9, 2014, 8:59pm UTC](https://forum.xojo.com/t/install-problem/19169/8 "2014-09-09T20:59:47Z")

</div>

ldd returns the following:  
libdl.so.2 =\> /lib/libdl.so.2 (0xb7761000)  
libpthread.so.0 =\> /lib/i686/libpthread.so.0 (0xb7746000)  
libc.so.6 =\> /lib/i686/libc.so.6 (0xb758e000)  
/lib/ld-linux.so.2 (0xb777f000)

---

<div class="post-metadata">

**Author:** ![brian\_franco](https://forum.xojo.com/user_avatar/forum.xojo.com/brian_franco/32/156_2.png) [@brian\_franco](https://forum.xojo.com/u/brian_franco)\
**Post date:** [September 9, 2014, 9:03pm UTC](https://forum.xojo.com/t/install-problem/19169/9 "2014-09-09T21:03:01Z")

</div>

> [@128155:@Norman Palardy](#):
>
> Or a distro that’s officially supported

that also works 😛

---

<div class="post-metadata">

**Author:** ![Gary\_Vassalotti](https://forum.xojo.com/user_avatar/forum.xojo.com/gary_vassalotti/32/444_2.png) [@Gary\_Vassalotti](https://forum.xojo.com/u/Gary_Vassalotti)\
**Post date:** [September 10, 2014, 3:19am UTC](https://forum.xojo.com/t/install-problem/19169/10 "2014-09-10T03:19:57Z")

</div>

Ok, I installed Linux Mint… looks like a nice distro, on the tested list… I still get a segmentation fault…

---

<div class="post-metadata">

**Author:** ![Norman\_P](https://forum.xojo.com/letter_avatar_proxy/v4/letter/n/858c86/32.png) [@Norman\_P](https://forum.xojo.com/u/Norman_P)\
**Post date:** [September 10, 2014, 5:31am UTC](https://forum.xojo.com/t/install-problem/19169/11 "2014-09-10T05:31:57Z")

</div>

again run ldd on the executable  
post the full report  
start the IDE from the command line and see what that reports

---

<div class="post-metadata">

**Author:** ![Gary\_Vassalotti](https://forum.xojo.com/user_avatar/forum.xojo.com/gary_vassalotti/32/444_2.png) [@Gary\_Vassalotti](https://forum.xojo.com/u/Gary_Vassalotti)\
**Post date:** [October 9, 2014, 4:04am UTC](https://forum.xojo.com/t/install-problem/19169/12 "2014-10-09T04:04:54Z")

</div>

I have not had a chance to get back to this for a while, but I will note that it would run fine on my laptop with Mageia 4 64 bit , but not the desktop with that same version of Linux. I then put Virtual Box with Vista on my desktop… Xojo still crashes there…

SO, I am think there is a hardware problem somewhere…

---

<div class="post-metadata">

**Author:** ![Michel\_Bujardet](https://forum.xojo.com/user_avatar/forum.xojo.com/michel_bujardet/32/252_2.png) [@Michel\_Bujardet](https://forum.xojo.com/u/Michel_Bujardet)\
**Post date:** [October 9, 2014, 7:40am UTC](https://forum.xojo.com/t/install-problem/19169/13 "2014-10-09T07:40:07Z")

</div>

It is obviously a hardware issue. [https://en.wikipedia.org/wiki/Segmentation\_fault](https://en.wikipedia.org/wiki/Segmentation_fault)

You may want to remove and clean the contacts of your memory cards. If you got as often two memory cards, remove one, reboot and see if the error manifests again. Then switch to the other and check again. If this is an issue with one of them you will be able to spot which one is at fault and replace it.

---

<div class="post-metadata">

**Author:** ![Gary\_Vassalotti](https://forum.xojo.com/user_avatar/forum.xojo.com/gary_vassalotti/32/444_2.png) [@Gary\_Vassalotti](https://forum.xojo.com/u/Gary_Vassalotti)\
**Post date:** [October 13, 2014, 8:49pm UTC](https://forum.xojo.com/t/install-problem/19169/14 "2014-10-13T20:49:33Z")

</div>

Thanks Michel, I tried that but there was no change… Must be a problem on the mother board I guess.

---

<div class="post-metadata">

**Author:** ![Robert\_Bednar](https://forum.xojo.com/user_avatar/forum.xojo.com/robert_bednar/32/513_2.png) [@Robert\_Bednar](https://forum.xojo.com/u/Robert_Bednar)\
**Post date:** [October 30, 2014, 4:03am UTC](https://forum.xojo.com/t/install-problem/19169/15 "2014-10-30T04:03:53Z")

</div>

Everyone in this thread sounds too smart to fall victim to the obvious stuff…but since it’s a segmentation fault… I’ll just say that I have seen those when I try to write to a log file in a directory where the permissions do not permit it. “Permissions” problems are so common that I can’t imagine it was not already reviewed…just some thoughts from a XOJO noob.

---

<div class="post-metadata">

**Author:** ![Gary\_Vassalotti](https://forum.xojo.com/user_avatar/forum.xojo.com/gary_vassalotti/32/444_2.png) [@Gary\_Vassalotti](https://forum.xojo.com/u/Gary_Vassalotti)\
**Post date:** [November 16, 2014, 4:02am UTC](https://forum.xojo.com/t/install-problem/19169/16 "2014-11-16T04:02:20Z")

</div>

Ok, some more info…

I had to change laptops, old one was dying… new one uses Intel I3 chip. I installed Mageia4 64 bit, and installed the required 32 bit libs (like on my old laptop).

I can get Xojo to run simple programs, but when I load the larger ones I get thiese errors:

Gtk-WARNING \*\*: gtk\_menu\_attach\_to\_widget(): menu already attached to GtkImageMenuItem  
FIXME: Oxygen::WidgetSizeData: unknown window type: “GtkWindow”

(Xojo:23844): Gtk-WARNING \*\*: gtk\_menu\_attach\_to\_widget(): menu already attached to GtkImageMenuItem  
Segmentation fault

SO, I think this is a software / library issue???

---

<div class="post-metadata">

**Author:** ![Gary\_Vassalotti](https://forum.xojo.com/user_avatar/forum.xojo.com/gary_vassalotti/32/444_2.png) [@Gary\_Vassalotti](https://forum.xojo.com/u/Gary_Vassalotti)\
**Post date:** [November 17, 2014, 2:02am UTC](https://forum.xojo.com/t/install-problem/19169/17 "2014-11-17T02:02:48Z")

</div>

Some more info:

I moved the program to windows and deleted the menu form… it worked for a few times, then the error returned.

Then I installed virtual box, running vista (on the mageia 4 64 bit laptop). xojo runs, loads the program, compiles it for lInux, and it runs on the laptop under linux with no errors???

---

<div class="post-metadata">

**Author:** ![Tim\_Jones](https://forum.xojo.com/user_avatar/forum.xojo.com/tim_jones/32/8627_2.png) [@Tim\_Jones](https://forum.xojo.com/u/Tim_Jones)\
**Post date:** [November 17, 2014, 4:00am UTC](https://forum.xojo.com/t/install-problem/19169/18 "2014-11-17T04:00:11Z")

</div>

[quote=143680:@Gary Vassalotti]Gtk-WARNING \*\*: gtk\_menu\_attach\_to\_widget(): menu already attached to GtkImageMenuItem  
FIXME: Oxygen::WidgetSizeData: unknown window type: “GtkWindow”

(Xojo:23844): Gtk-WARNING \*\*: gtk\_menu\_attach\_to\_widget(): menu already attached to GtkImageMenuItem  
[/quote]  
These are normal and not related to your segfault.

However, looking at your STRACE output, that looks like it’s trying to use a lot of 64bit calls. And, they look like they belong to the webkit stuff. Are you sure that you installed the 32bit version of the OS?

---

<div class="post-metadata">

**Author:** ![Gary\_Vassalotti](https://forum.xojo.com/user_avatar/forum.xojo.com/gary_vassalotti/32/444_2.png) [@Gary\_Vassalotti](https://forum.xojo.com/u/Gary_Vassalotti)\
**Post date:** [November 17, 2014, 6:59pm UTC](https://forum.xojo.com/t/install-problem/19169/19 "2014-11-17T18:59:48Z")

</div>

On my old laptop, where it worked fine, I had Mageia4 64, on my desktop I have Mageia 32 bit (still get segmentation fault), on the new laptop I have again the Mageia4 64bit.

Note that I did install Linux mint on my desktop but it also still exhibited the segmentation fault.

---

<div class="post-metadata">

**Author:** ![Tim\_Jones](https://forum.xojo.com/user_avatar/forum.xojo.com/tim_jones/32/8627_2.png) [@Tim\_Jones](https://forum.xojo.com/u/Tim_Jones)\
**Post date:** [November 17, 2014, 7:03pm UTC](https://forum.xojo.com/t/install-problem/19169/20 "2014-11-17T19:03:49Z")

</div>

Does it segfault when you debug it in the IDE on one of the systems exhibiting the problem?

[Next page](https://forum.xojo.com/t/install-problem/19169.md?page=2)