uart communication on h/w pins

  1. 11 months ago

    I'm trying to make an application on raspberry pi which majorly has a serial function. It has to collect data and respond to it from the h/w uart ports i.e GPIO14 (TX) and GPIO15(RX).
    I've Added a serial interface from the xojo library but it doesn't seem work at all. The serial interface is open but nothing is echoed on the pins.
    is there a way to specify the path such as "/dev/ttyAMA0 "??
    I'm using a RPi 3 with raspbian stretch.
    I'd really appreciate a quick response.


  2. Edited 11 months ago

    In the Pi3, /dev/ttyAMA0 is used to provide on-board bluetooth.

    Here is a good article that will help you disable bluetooth and reassign the hardware UART so you can use it in Xojo.

    You can then use something like:

    serial1.serialport = system.serialport("/dev/ttyAMA0")

or Sign Up to reply!